Flue Equipment

We have a range of flue equipment available for the Dachs unit with and without the condenser. It is always recommended to install the condensing unit as you can use the plastic internal flue kit. Without the condenser you would need to arrange the installation of a costly stainless steel welded flue. We can also supply an external flue kit, horizonatal and vertical flue pipes. For the full range of options please see the table below.

 

Internal plastic condensing flue kit DN80 

- for internal installation and consisting of:
  straight lengths - 1 x 500 mm., 7 x 1000 mm. 
  bends 2 x 87°, 2 x 45°
  1 x T-piece including inspection opening

EFS-1 flue draught diverter

- for connecting 1 x non-condesing Dachs to flue/chimney

EFS-2 flue draught diverter

- for connecting 2 x non-condensing Dachs to flue/chimney

EFS-3 flue draught diverter

- for connecting 3 x non-condensing Dachs to flue/chimney

External vertical condensing flue terminal kit DN80/125

- twin pipe, for external wall installation and consisting of:
  straight lengths 1 x 500 mm., 1 x 1000 mm.
  2 x flue pipe wall coverplates
  1 x 87 bend
  1 x vertical flue terminal
  2 x external fixing brackets

Horizontal wall condensing flue terminal DN80/125

- white twin-pipe terminal, 620 mm. long c/w 2 x wall cover plate

Vertical roof condensing terminal DN80/DN125

- black for through-roof installation, 1210 mm. long

Universal pitched roof flashing 25/45

- black, 131 mm. diameter

Flat roof flashing

- aluminium, 131 mm. diameter

 

 

 

 

 

 

  

 

- for connecting 1 x non-condensing Dachs to flue/chimney